Wireless Security System
This equipment is not to be confused with cheap imported UHF short wireless range products found in many popular DIY stores. Our products use industrial VHF frequencies giving better range and less problems with interference and false alarms.
Detectors can transmit line of sight up to 1000 ft or should you require more range, up to 2 miles with an aerial.
Simple to operate 8 zone panel has every conceivable, programmable feature you could need, allowing connection of up to 32 devices.
A simple system can consist of as little as one detector and the control panel, from there you can very simply add more as you need it.
The system can be part or full set and used in alarm or indicator mode. When in 'alarm mode' the system will sound the alarm when the detector beam is broken. When in 'indicator mode' the system will 'chime or bing-bong' when the detector beam is broken, alerting you that someone has entered your premises.
The detectors are not motion sensors that can be set off by a moving branch or foliage but instead rely on heat to sense intrusion, and therefore are less likely to give false alarms.
Bell/strobe boxes, smoke detectors, vibration sensors, auto diallers can all be added to the system.
British built, used by many Police forces and Government departments
Martley range of security equipment is supplied ready for use. It's wireless, simply place the detectors where you need them and plug in the panel/indicator.
All outdoor weatherproof detectors are supplied with PP3 Alkaline batteries which last about 12 months. Indoor detectors use AA cells and last about 3 years. The panel will notify you when to replace them, giving about 3 weeks advance notice.
We only use DTI, MOD, CE approved equipment built here in the UK to BS6799 Class 6 or Class 3 NACOSS specifications.
Systems are suitable for DIY install and come pre-configured ready for use
As seen on BBC television's
"To Catch a Thief"
